Menu
Call (609) 699-0240
Chimney Parts

Chimney Liner Repair Burlington, NJ

Cracked flue tiles, open mortar joints and damaged liners in Burlington chimneys can often be repaired without a full reline so the flue seals again and heat and gases stay where they belong. Call (609) 699-0240 to reach a local chimney sweep.

The liner is the part of the chimney you cannot see, which is why damage to it often goes unnoticed for years. In most masonry chimneys it is a stack of clay flue tiles joined with mortar, and in relined chimneys it is a stainless steel tube. Each has its own weak points.

Sudden heat, house settling and water are the main things that crack and loosen clay tiles. Even when the tiles hold up, the mortar between them can erode, opening gaps along the flue. Stainless liners usually fail from corrosion or damage after a chimney fire.

Liner damage matters because the liner is what keeps heat and carbon monoxide inside the flue. Cracks and gaps can let heat reach wood framing near the chimney and can let carbon monoxide leak into the house. Working carbon monoxide alarms are essential, and if one goes off, leave the house and call 911 from outside.

If the problem goes deeper than it first looked, a Burlington chimney sweep may also recommend chimney liner installation or chimney inspection.

Looking for Burlington chimney liner repair? Call (609) 699-0240 to reach a nearby chimney sweep.

Call now
The process

What happens during a liner repair

Here is how a sweep usually approaches a damaged liner.

  1. Clear the soot

    Creosote and soot are cleaned out before anything is judged. Any loose tile pieces are removed.

  2. Inspect the flue

    A video camera is run up the flue to record every tile, joint and section. You can ask to see the video yourself.

  3. Choose the repair

    Small cracks and open joints can usually be repaired, while widespread damage points to relining. The choice depends on how much of the liner is damaged.

  4. Repair the liner

    Open joints and cracks are sealed with a heat resistant resurfacing compound, often drawn up the flue with a foam applicator. Stainless liners with damage usually need the damaged section or the whole liner replaced.

  5. Rescan the flue

    The repaired liner is inspected before the fireplace is used again. The appliance draft is tested too.

What is included

What chimney liner repair covers

Liner resurfacing

A heat rated coating restores the inner surface so the flue seals again.

Stainless liner replacement

A corroded or crushed stainless liner is swapped for a new one and the connections resealed.

Joint repair

Eroded joints are rebuilt to close gaps without taking the chimney apart.

Full reline

If too much of the liner is damaged, relining is the better option rather than patching it piece by piece.

Top tile replacement

Damaged tiles near the crown are replaced and sealed to the crown.

Related service

Flue Tile Repair Burlington, NJ

Most masonry chimneys are lined with clay flue tiles stacked end to end and joined with mortar. Typical damage includes vertical cracks, broken corners, missing mortar and tiles that have shifted out of line. The top tile is often replaced during crown work, because it takes the most weather.

For tiles deeper in the chimney, repair usually means sealing cracks and joints from inside with a heat resistant compound rather than removing tiles. When you call (609) 699-0240 from Burlington, it helps to share when the chimney was last inspected and whether tile pieces have fallen. A video inspection settles which route to take.

Local help

Chimney Liner Repair Near Me

In Burlington, cold weather fires heat a cold flue quickly, which is hard on clay tiles. In Burlington and neighboring towns like Florence, Beverly, Roebling and Bordentown, sweeps regularly find open joints and cracked tiles during inspections, which is why a yearly inspection matters for the parts of the chimney you cannot see.

Need chimney liner repair around Burlington? Call (609) 699-0240 for a Burlington chimney sweep who serves the towns around it too.

How the weather here affects chimneys around Burlington

Cold winters keep fireplaces, wood stoves and oil burners working for half the year or more. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: rain and melting snow soak into the crown and joints, then freeze and push them apart, and each winter widens the cracks a little more. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Burlington, NJ schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why fix it now

Safer fires

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Local knowledge

Local sweeps see the same chimney types and weather wear across Burlington and nearby towns.

Straight answers

Ask your questions before you agree to anything.

Common questions about chimney liner repair

Should I stop using the fireplace if the liner is cracked?
Cracks or gaps in the liner can allow heat and gases to escape, which is why most sweeps advise against using it until repaired. Many repairs are done without major work. Make sure CO alarms are installed and working.
Is relining better than repairing the liner?
The right choice comes down to the extent of the damage and the appliance using the flue. Limited cracks are often repairable, but a liner with damage along much of its length is usually replaced. Ask to see the inspection video before deciding.
Can a cracked chimney liner be repaired?
Many clay tile liners with limited damage can be repaired by sealing cracks and rebuilding joints from inside. If too many tiles are cracked or out of line, a new liner is the safer fix. A camera inspection shows which option fits.
What are the signs of a damaged flue liner?
Liner damage is hard to see without a camera, so most of it is found during a Level 2 inspection. Signs you might notice include broken tile in the fireplace, smoke smells upstairs and damp spots on the chimney indoors. After any chimney fire, have the liner inspected before using it again.
What causes chimney liners to crack?
A chimney fire can crack clay tiles in minutes because of the intense heat. Water, freeze and thaw cycles and the house settling can also crack or shift tiles. Annual sweeping and inspections lower the chances of liner damage.

More questions? Call (609) 699-0240

Related services

  • Chimney Liner Installation

    Putting a new liner in the flue sized to the fireplace, stove, furnace or water heater it serves.

    Learn more
  • Chimney Inspection

    An annual look at the flue, firebox, damper, crown and cap so you know whether it is safe to light a fire.

    Learn more
  • Chimney Fire Damage Repair

    Inspecting and repairing a chimney after a flue fire whether the fire was loud and obvious or slow and silent.

    Learn more
  • Smoke Chamber Repair

    Repairing the sloped masonry above the damper where smoke funnels into the flue so smoke moves up cleanly and creosote has fewer places to collect.

    Learn more

Looking for something else?

See all chimney services

Get chimney liner repair help in Burlington

Call (609) 699-0240 to talk to a chimney sweep serving Burlington, NJ.

(609) 699-0240

Free to call. No forms to fill out.

Call (609) 699-0240