Menu
Call (609) 699-0240
Masonry Repair

Chimney Fire Damage Repair Burlington, NJ

After a chimney fire in Burlington, the flue should not be used again until a sweep has inspected it, usually with a camera, and repaired whatever the heat damaged whether the fire was a loud roar or went unnoticed. Call (609) 699-0240 to reach a local chimney sweep.

A chimney fire that is still burning calls for 911, not a sweep, and everyone should leave the house. Once the fire is out, the next job is finding out what it did to the chimney. The heat inside a chimney fire is intense enough to damage parts that normally last for decades.

People often expect a dramatic fire, yet a lot of chimney fires go unnoticed. A slow-burning fire can smolder in the flue without anyone in the house hearing it, and the first clue may show up weeks later. Signs afterward include puffy, honeycombed creosote, flakes of creosote on the roof or ground, a warped cap or damper and cracks in the masonry.

Under NFPA 211, a chimney fire is one of the triggers for a Level 2 inspection with a camera. The camera shows exactly which tiles cracked and how badly. The results guide every repair decision that follows.

Chimney Fire Damage Repair is often paired with chimney inspection and chimney liner installation, depending on the cause.

Need chimney fire damage repair in Burlington? Call (609) 699-0240 to reach a nearby chimney sweep.

Call now
The process

What happens after a chimney fire

Repairing fire damage follows a set order, because no repair should start until the full extent of the damage is known.

  1. Hold off on fires

    The fireplace or stove stays out of use until the chimney is cleared. A cracked liner can let the next fire reach the framing.

  2. Remove the creosote

    Leftover creosote and debris come out first. Puffed creosote is brittle but can coat the liner thickly.

  3. Level 2 inspection

    A Level 2 inspection checks the flue by camera and looks at the chimney from the attic and roof. Cracked tiles and open joints show clearly on video.

  4. Restore the liner

    A badly damaged flue is relined, most often with stainless steel sized to the appliance. The camera footage decides which option makes sense.

  5. Fix the metal

    Warped dampers, caps and stovepipe are replaced. Factory-built chimneys may need sections replaced per the manufacturer.

  6. Final check

    The technician confirms the system is sound before any fire is lit. Regular sweeping is the best defense against a repeat.

What is included

Common chimney fire repairs

Joint restoration

Clay flues with minor cracking may be resurfaced instead of relined when the camera shows the damage is limited.

Brick repair

Cracked brick and blown-out mortar joints are repaired along with any scorched flashing.

Creosote removal

The flue and smoke chamber are cleaned of fire residue including any glazed patches.

Chimney relining

Cracked clay flues are relined with a liner sized to the appliance with a cap at the top.

Level 2 inspection

A full camera scan of the flue plus a check of the attic, roof and accessible areas to find every crack.

Related service

Chimney Fire Inspection Burlington, NJ

After a chimney fire, the inspection goes beyond the routine annual check and includes a camera scan of the whole flue. The scan shows tile cracks, gaps in joints and any spot where heat may have escaped the flue. When concealed areas need a closer look, the next step up is a Level 3 inspection.

If you are in Burlington, it helps to mention when the suspected fire happened and what kind of appliance you burn in. Many homeowners policies cover chimney fire damage, and an insurer will usually want a written inspection report. Do not test the chimney with a small fire in the meantime.

Local help

Chimney Fire Damage Repair Near Me

Homes around Burlington that burn wood regularly are the ones most likely to see a chimney fire. From Burlington out to neighboring places like Florence, Beverly, Roebling and Bordentown, many houses still have their original clay flues, which do not tolerate a chimney fire well, which is why a camera inspection after a suspected fire matters so much.

Need chimney fire damage repair around Burlington? Call (609) 699-0240 for a Burlington chimney sweep who serves the towns around it too.

What the local climate does to a chimney

Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: rain and melting snow soak into the crown and joints, then freeze and push them apart, which is how cracks, loose bricks and leaks start. Wind driven rain from coastal storms finds any gap in flashing, too. Most homeowners in Burlington, NJ schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why act early

Smaller repairs

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Familiar with local homes

Local sweeps see the same chimney types and weather wear across Burlington and nearby towns.

Clear next steps

Ask your questions before you agree to anything.

Chimney Fire Damage Repair FAQ

What causes a chimney fire?
The usual cause is creosote buildup that ignites from the heat of a fire below. Burning wet or green wood, keeping fires smoldering and going too long between sweepings all add to the buildup. Sweeping on schedule keeps creosote from reaching dangerous levels.
How do I know if my chimney is on fire?
The signs of an active chimney fire include a roaring noise, popping and thick smoke from the chimney. If you suspect one, get everyone out of the house and call 911 from outside. Do not use the fireplace again until a sweep has inspected it.
Is it safe to use the chimney after a small chimney fire?
A chimney that has had a fire should not be used until a sweep has checked the flue with a camera. Hidden damage from one fire raises the danger of the next. After repairs, most chimneys can be used safely again.
Does a chimney need a new liner after a chimney fire?
That depends on what the camera shows. Widespread cracking in a clay flue usually means relining with stainless steel. Minor cracks may be repairable with a ceramic resurfacing material.
Will homeowners insurance cover chimney fire damage?
Your policy decides that, and the place to start is a call to your insurer. Ask the sweep for a written report and copies of the video. It helps to report the fire promptly.

More questions? Call (609) 699-0240

Related services

  • Chimney Inspection

    An annual look at the flue, firebox, damper, crown and cap so you know whether it is safe to light a fire.

    Learn more
  • Chimney Liner Installation

    Putting a new liner in the flue sized to the fireplace, stove, furnace or water heater it serves.

    Learn more
  • Creosote Removal

    Breaking down and clearing creosote buildup of every stage matched to how hard and thick the deposits are.

    Learn more
  • Chimney Liner Repair

    Restoring a damaged chimney liner with resurfacing, joint repair or partial replacement.

    Learn more

Looking for something else?

See all chimney services

Get chimney fire damage repair help in Burlington

Call (609) 699-0240 for a local chimney sweep in Burlington and nearby towns.

(609) 699-0240

Free to call. No forms to fill out.

Call (609) 699-0240