Crown work
A new crown is cast with an overhang and drip edge with an expansion joint at the flue tile.
Masonry Repair
Chimney Rebuilding Burlington, NJ
A chimney mason in Burlington can rebuild a chimney that is leaning, loose or crumbling, either from the roofline up or from the foundation, with new brick, flue tiles, crown and flashing. One call to (609) 699-0240 reaches a nearby chimney rebuilding pro.
Some chimneys reach a point where patching costs more over time than rebuilding the damaged section. Most rebuilds trace back to a cracked crown, missing cap or failed flashing that let water soak the chimney for years. Foundation movement, lightning, high winds and chimney fires can do it too.
In most cases, only the part above the roofline needs to be rebuilt. Because the top of the chimney is fully exposed, it often deteriorates while the lower part stays solid, which makes a partial rebuild the common choice. A full rebuild from the foundation is reserved for chimneys that are leaning badly, separating from the house or failing all the way down.
Starting fresh means the new chimney can be built to do its job better. The new section can include a new flue liner, a crown with an overhang and drip edge, proper step and counter flashing and a cap. It can also be built to the right height, at least three feet above the roof where it passes through and two feet higher than anything within ten feet, the common rule for proper draft and fire safety.
Depending on what the sweep finds, chimney rebuilding in Burlington, NJ can go hand in hand with chimney masonry repair and chimney tuckpointing.
Looking for Burlington chimney rebuilding? Call (609) 699-0240 and describe the problem to a chimney sweep who works in Burlington.
Call nowThe process
How chimney rebuilding works
Rebuilding a chimney involves several steps, from inspection to the new cap.
Assess the structure
The mason inspects the chimney to find where the masonry is still sound and how far down the damage goes. The appliance the chimney serves is noted, since it shapes the new flue.
Design the new chimney
The plan covers where the rebuild starts, the brick to be used, the flue liner, crown design, flashing and chimney height. Some areas require a permit for chimney rebuilds, so ask about local rules.
Prep the site
Tarps, roof protection and scaffolding or roof brackets are set up before demolition. Interior openings are sealed against dust.
Take it down
The chimney is dismantled by hand down to solid masonry. Salvaged brick helps the new section blend in.
Rebuild the chimney
New brick is laid with the flue liner installed course by course. Proper clearance between the masonry and combustible framing is maintained.
Seal it up
The rebuild is finished with a proper crown, new flashing at the roof and a screened cap. A breathable water repellent may be applied once the mortar cures.
What is included
Types of chimney rebuilds
Foundation rebuilds
The whole chimney is taken down and built new when the entire structure is unsound.
New flashing
New step and counter flashing is installed at the roof instead of reusing old metal.
Roofline rebuilds
The chimney is rebuilt from the roofline up with new brick, crown and flashing.
New flue liners
The flue is replaced during the rebuild for safe venting.
Related service
Chimney Removal Burlington, NJ
Some homeowners choose to remove an unused chimney rather than rebuild it. A partial removal stops below the roof, where the opening is framed, decked and roofed over. Taking it out completely means demolition through every floor and repairing framing and finishes along the way.
A Burlington chimney removal starts by checking what the chimney still does. If a heating appliance or water heater uses the chimney, it has to be vented another way before removal. A chimney can support framing, so the plan should account for that, and some older chimney materials need testing before they are disturbed.
Local help
Chimney Rebuilding Near Me
Around Burlington, the chimneys that need rebuilding are often the ones that went many years without a crown, cap or flashing repair. From Burlington out to neighboring communities such as Florence, Beverly, Roebling and Bordentown, older chimneys that were never capped or crowned properly tend to reach the rebuild stage first, and a well-built crown and cap protect the new work for years.
For chimney rebuilding in Burlington, NJ or nearby towns like Florence, Beverly, Roebling and Bordentown, call (609) 699-0240 to reach a chimney sweep who covers your street.
How the weather here affects chimneys around Burlington
Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: rain and melting snow soak into the crown and joints, then freeze and push them apart, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Burlington, NJ schedule a sweep in early fall, and a repair check after a hard winter.
Why call
Why not wait
Smaller repairs
Small chimney problems caught early usually stay small repairs.
Familiar with local homes
Local sweeps see the same chimney types and weather wear across Burlington and nearby towns.
Clear next steps
Ask your questions before you agree to anything.
Chimney Rebuilding questions
Can a rebuilt chimney match the original brick?
The mason works to match the original look using similar brick and mortar. Reusing sound original brick helps the new section blend in. Exact matches can be hard with very old brick, so ask to see options before work starts.
When does a chimney need rebuilding instead of repair?
Signs include a lean, separation from the house, loose courses and widespread spalling. Smaller damage is better handled with repairs. An inspection shows where sound masonry starts and how much needs to come down.
Can I remove my chimney instead of rebuilding it?
For an unused chimney, removal can be more practical than a major rebuild. Any appliance that vents through the chimney must be given another vent first. Partial removal below the roofline is the most common choice, while full removal is a larger job involving the interior.
Do I need a full chimney rebuild or just a partial one?
A partial rebuild takes the chimney down to sound masonry, usually at or near the roofline, and rebuilds from there. Full rebuilds start at the base. Most rebuilds are partial, since the exposed top usually fails first, while full rebuilds are for leaning or structurally failing chimneys.
Is a leaning chimney dangerous?
A visibly leaning chimney deserves prompt attention. Keep people and pets away from the area below and avoid using the fireplace or any appliance vented through it until it is checked. Leaning chimneys commonly need a full rebuild.
More questions? Call (609) 699-0240
Often needed together
Chimney Masonry Repair
Fixing the brick, stone and mortar that hold a chimney together, with materials matched to the original masonry.
Learn moreChimney Tuckpointing
Replacing crumbling mortar between chimney bricks, so rain stops getting in through the joints.
Learn moreChimney Crown Repair
Repairing the concrete slab that caps the top of the chimney, so water stops soaking into the masonry from the top.
Learn moreChimney Flashing Repair
Fixing loose, rusted or tar-patched flashing around the chimney, to stop leaks at the roof line for good.
Learn more
Looking for something else?
See all chimney servicesTalk to a Burlington chimney sweep about chimney rebuilding
Call (609) 699-0240 for a local chimney sweep in Burlington and nearby towns.
(609) 699-0240
Free to call. No forms to fill out.